Woodpecker Birdhouse Avon Park FL

Local resource for woodpecker birdhouses in Avon Park, FL. Includes detailed information on local businesses that provide access to woodpecker birdhouses, birdhouses, bird feeders, bird house plans, and bird house designs, as well as advice and content on bird house building, attracting birds, and bird house kids.

Hobby Hill Florist
(863) 385-8049
541 N Ridgewood Dr
Sebring, FL

Data Provided By:
Mc Lane's Country Gardens
(863) 471-1468
328 Lime St
Sebring, FL

Data Provided By:
PETCO
(863) 382-2206
1704 US 27 North
Sebring, FL
Hours
Monday: 10:00am-8:00pm
Tuesday: 10:00am-8:00pm
Wednesday: 10:00am-8:00pm
Thursday: 10:00am-8:00pm
Friday: 10:00am-8:00pm
Saturday: 10:00am-8:00pm
Sunday: 10:00am-7:00pm

Pet Supermarket
(863) 402-2370
800 Sebring Sq
Sebring, FL

Data Provided By:
Palmer Ace Hardware
(863) 453-6688
415 W Main St
Avon Park, FL
 
Johnson & Johnson Growers
(863) 385-1966
5948 Sr 66
Sebring, FL

Data Provided By:
Johnson & Johnson Growers Inc
(863) 385-1966
5948 State Road 66
Sebring, FL

Data Provided By:
Arcade Pet Stop One
(863) 471-0080
1010 Us Highway 27 N
Sebring, FL

Data Provided By:
The Home Depot
(863)471-6119
2303 US Hwy 27 N
Sebring, FL
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

W & W Lumber of Lake Placid
(863) 471-6055
2512 Desoto Rd
Sebring, FL
 
Data Provided By:

How To: Woodpecker Box

Build an Easy Box for Golden-fronted, Red-headed, and Hairy Woodpeckers

Download detailed plans you can use to build your own woodpecker box.

The plans for this box were taken from The Original Birdhouse Book , which features 26 birdhouse, nesting shelf and nesting box plans you can build.

Tools You'll Need

Square
Pencil
Ruler
Saw
Plane
Rasp
Brace , with 1/2-in. bit and expansion bit up to 2-1/2 in. or keyhole saw
Drill , with assorted small bits
Hammer
Straightedge

Materials

Golden-fronted, Red-headed, and Hairy Woodpecker Box Cedar boards or exterior plywood , 5/8 in., 36-1/4 by 17-1/4 in.:
Bottom-6 by 6 in.
Sides (2)-each 14-3/4 by 13-3/4 by 6 in.
Back-17 by 7-1/4 in.
Front-14 by 7-1/4 in.
Roof-9-1/4 by 9-1/4 in.
Fourpenny galvanized box nails
Sixpenny galvanized box nails (2)
Galvanized nail or right-angle screw hook, about 1.5 in. long
Caulking compound
Sixteen-penny galvanized nail
Post (optional)- 4 by 4 in. or 4 by 6 in., 14 ft. long galvanized metal pole
Strapping brackets for mounting box
Predator baffle (pole- or post-mounted)

Instructions

  1. After you have looked over the drawings and decided which box or boxes to build, lay out the parts, with a square and pencil, on the weather surface. Saw out the pieces, plane the splinters, mark the parts, and put them aside. If the interior surface of the front, back, and sides is smooth, roughen it-really scar it up-with the corner of a rasp. This helps young birds gain a foothold when trying to climb to the hole when exiting the box. Cut back the corners of the bottom piece.
  2. In the back panel, drill a 1/2-in. hole 2 in. down from the top and centered horizontally. (On the downy woodpecker box, center the hole 1 in. down.) Bevel the back 1/8 in. toward the interior surface. On the front panel, bevel 1/8 in. toward the weather surface.
  3. Drill the entrance as shown for each box, using a keyhole saw or expansion bit on the larger boxes. If you have neither, then draw the circle and drill a series of 1/2- to 1-in. holes just inside the circumference. Chew out the hole with a rasp, rounding the edges. Woodpeckers won't mind a few irregularities.
  4. Draw a line across the interior surface of the back, 2-3/4 in. up from the bottom. Extend it across the edges and the weather surface.
  5. Next, draw a line across the interior surface of the front panel, 1 in. up from the bottom, and extend it over both edges.
  6. Draw 1 more line across the interior surface of the right side panel, 1 in. up from the bottom, and extend it across the edges.
  7. To begin assembly, start 2 nails on the weather surface of the right side panel to come out 1/4 in. below the line. Do not get the nails too close to the edges of the side panel, because the bottom edge, to which you will nail the side panel, has the corners cut off. Place the "decornered" bottom on edge, against a wall. Lay the side panel across, with the line matching the interior surface of the bottom. The wall will...

Author: Bird Watcher's Digest

Copyright2010 Bird Watcher's Digest

Click here to read the rest of this article from birdwatchersdigest.com