Woodpecker Birdhouse Biloxi MS

Local resource for woodpecker birdhouses in Biloxi, MS. Includes detailed information on local businesses that provide access to woodpecker birdhouses, birdhouses, bird feeders, bird house plans, and bird house designs, as well as advice and content on bird house building, attracting birds, and bird house kids.

Hood's Discount Ms
(228) 863-0005
7900 Highway 49
Gulfport, MS

Data Provided By:
All Around Landscape
(866) 875-5582
2426 Government St
Ocean Springs, MS

Data Provided By:
PetSmart
(228) 539-9722
15134 Crossroads Pkwy
Gulfport, MS
Hours
Monday - Friday: 9:00-9:00
Sunday: 10:00-6:00

Bay Haven Cavaliers
(228) 697-7320
682 N Haven Dr.
Biloxi, MS
 
The Home Depot
(228)354-8872
1680 Elizabeth Blvd
Biloxi, MS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Landscape Logistics, LLC
(228) 392-8779
9046 Woolmarket Road
Biloxi, MS
Products / Services
Mulch, Plants, Soil Mix and Palms

PetSmart
(228) 396-1540
3948 Promenade Parkway
DIberville, MS
Hours
Monday - Friday: 9:00-9:00
Sunday: 10:00-6:00

SIMPLY PETS
(228) 392-1905
15208 LEMOYNE BLVD
BILOXI, MS
 
PetSmart
(228) 539-9722
15134 CROSSROADS PARKWAY
GULFPORT, MS

Data Provided By:
Newman Lumber Company
(228) 832-1899
P.O. Box 2580
Gulfport, MS

Data Provided By:
Data Provided By:

How To: Woodpecker Box

Build an Easy Box for Golden-fronted, Red-headed, and Hairy Woodpeckers

Download detailed plans you can use to build your own woodpecker box.

The plans for this box were taken from The Original Birdhouse Book , which features 26 birdhouse, nesting shelf and nesting box plans you can build.

Tools You'll Need

Square
Pencil
Ruler
Saw
Plane
Rasp
Brace , with 1/2-in. bit and expansion bit up to 2-1/2 in. or keyhole saw
Drill , with assorted small bits
Hammer
Straightedge

Materials

Golden-fronted, Red-headed, and Hairy Woodpecker Box Cedar boards or exterior plywood , 5/8 in., 36-1/4 by 17-1/4 in.:
Bottom-6 by 6 in.
Sides (2)-each 14-3/4 by 13-3/4 by 6 in.
Back-17 by 7-1/4 in.
Front-14 by 7-1/4 in.
Roof-9-1/4 by 9-1/4 in.
Fourpenny galvanized box nails
Sixpenny galvanized box nails (2)
Galvanized nail or right-angle screw hook, about 1.5 in. long
Caulking compound
Sixteen-penny galvanized nail
Post (optional)- 4 by 4 in. or 4 by 6 in., 14 ft. long galvanized metal pole
Strapping brackets for mounting box
Predator baffle (pole- or post-mounted)

Instructions

  1. After you have looked over the drawings and decided which box or boxes to build, lay out the parts, with a square and pencil, on the weather surface. Saw out the pieces, plane the splinters, mark the parts, and put them aside. If the interior surface of the front, back, and sides is smooth, roughen it-really scar it up-with the corner of a rasp. This helps young birds gain a foothold when trying to climb to the hole when exiting the box. Cut back the corners of the bottom piece.
  2. In the back panel, drill a 1/2-in. hole 2 in. down from the top and centered horizontally. (On the downy woodpecker box, center the hole 1 in. down.) Bevel the back 1/8 in. toward the interior surface. On the front panel, bevel 1/8 in. toward the weather surface.
  3. Drill the entrance as shown for each box, using a keyhole saw or expansion bit on the larger boxes. If you have neither, then draw the circle and drill a series of 1/2- to 1-in. holes just inside the circumference. Chew out the hole with a rasp, rounding the edges. Woodpeckers won't mind a few irregularities.
  4. Draw a line across the interior surface of the back, 2-3/4 in. up from the bottom. Extend it across the edges and the weather surface.
  5. Next, draw a line across the interior surface of the front panel, 1 in. up from the bottom, and extend it over both edges.
  6. Draw 1 more line across the interior surface of the right side panel, 1 in. up from the bottom, and extend it across the edges.
  7. To begin assembly, start 2 nails on the weather surface of the right side panel to come out 1/4 in. below the line. Do not get the nails too close to the edges of the side panel, because the bottom edge, to which you will nail the side panel, has the corners cut off. Place the "decornered" bottom on edge, against a wall. Lay the side panel across, with the line matching the interior surface of the bottom. The wall will...

Author: Bird Watcher's Digest

Copyright2010 Bird Watcher's Digest

Click here to read the rest of this article from birdwatchersdigest.com